M Scale Durometers
O-Rings
This system is designed specifically for measuring small cross section O-rings and thin pieces of rubber (not less than 1.25mm thick).
The Type 3 Operating Stand (indenter to specimen) is required for all Type M Durometers. Hydraulic, pneumatic dampening, or electromechanical shall be capable of controlling the rate of descent at a maximum of 3.2 mm/s (0.125in./s) and applying a force sufficient to overcome the calibrated spring force. Manual application, Type 1 or Type 2 operating stands are not acceptable for Type M durometer operation.
$1,995.00
Ships in 5 to 10 Business Days
$3,590.00
Ships in 5 to 7 days
