PTC®Surface Thermometers Spot Check with Max-Min Ancillary Hands

PTC® Direct Contact Spot Check® Surface Thermometers with Max-Min Ancillary Hands

PTC®'s Spot-Check® Series of thermometers feature outstanding response and sensitivity. Their extremely low thermal mass and weight (1/2 ounce), along with a unique design, assure intimate thermal contact and a very rapid readout. Each thermometer is guaranteed to an accuracy of ±2% of full scale range. PTC Metrology™ has NIST traceable and A2LA accredited certification services available.

These instruments can be used for such applications as hot plates, griddles, furnaces, annealing and curing ovens, weld preheats, motors, generators, engines, bearings, etc.

Available options for this thermometer are with Magnet & Leaf Spring or Max-Min Ancillary Hands

Models 575FMSS & 575CMSS are available with stainless steel dials for use in vacuum chamber. To order, scroll to the bottom of this page.

If you have any questions regarding our calibration lab and/or written certification, you can review our Scope of Accreditation or give us a call 877.782.2329

Click image for close-up

577FM Surface Thermometer Spot Check® with Max-Min Ancillary Hands
37.00
Fahrenheit (Temperature Range F 0° to 270°)

For 3 point N.I.S.T. Traceable/A2LA to ISO 17025-ANSI/NCSL Z540-1 Certification, order thermometer with cert.

Technical Data PDF

571CMM Surface Thermometer Spot Check® with Max-Min Ancillary Hands
37.00
Celcius (Temperature Range C 10° to 160°)

For 3 point N.I.S.T. Traceable/A2LA to ISO 17025-ANSI/NCSL Z540-1 Certification, order thermometer with cert.

Technical Data PDF

578FM Surface Thermometer Spot Check® with Max-Min Ancillary Hands
37.00
Fahrenheit (Temperature Range F 50° to 320°)

For 3 point N.I.S.T. Traceable/A2LA to ISO 17025-ANSI/NCSL Z540-1 Certification, order thermometer with cert.

Technical Data PDF

574CM Surface Thermometer Spot Check® with Max-Min Ancillary Hands
37.00
Celcius (Temperature Range C 10° to 260°)

For 3 point N.I.S.T. Traceable/A2LA to ISO 17025-ANSI/NCSL Z540-1 Certification, order thermometer with cert.

Technical Data PDF

574FM Surface Thermometer Spot Check® with Max-Min Ancillary Hands
37.00
Fahrenheit (Temperature Range F 50° to 500°)

For 3 point N.I.S.T. Traceable/A2LA to ISO 17025-ANSI/NCSL Z540-1 Certification, order thermometer with cert.

Technical Data PDF

575CM Surface Thermometer Spot Check® with Max-Min Ancillary Hands
37.00
Celcius (Temperature Range C 10° to 525°)

For 3 point N.I.S.T. Traceable/A2LA to ISO 17025-ANSI/NCSL Z540-1 Certification, order thermometer with cert.

Technical Data PDF

575FM Surface Thermometer Spot Check® with Max-Min Ancillary Hands
37.00
Fahrenheit (Temperature Range F 50° to 1000°)

For 3 point N.I.S.T. Traceable/A2LA to ISO 17025-ANSI/NCSL Z540-1 Certification, order thermometer with cert.

Technical Data PDF

575FMSS Stainless Steel Dial-Spot Check® Surface Thermometer with Max-Min Ancillary Hands
40.00
Fahrenheit (Temperature Range F 50° to 1000°)

For 3 point N.I.S.T. Traceable/A2LA to ISO 17025-ANSI/NCSL Z540-1 Certification, order thermometer with cert.

Technical Data PDF

575CMSS Stainless Steel Dial-Spot Check® Surface Thermometer with Max-Min Ancillary Hands
40.00
Celcius (Temperature Range C 10° to 525°)

For 3 point N.I.S.T. Traceable/A2LA to ISO 17025-ANSI/NCSL Z540-1 Certification, order thermometer with cert.

Technical Data PDF