PTC®Surface Thermometers Dual Magnet

thermometers_surface_dmm.htm PTC®Surface Thermometers Dual Magnet

PTC® Surface Thermometers: Dual Magnet / Dual Scale

PTC®'s Dual Magnet / Dual Scale Surface Thermometers are specifically designed to measure surface temperatures for either Fahrenheit or Celcius. Made in the USA of quality materials, these thermometers can be used on any horizontal surface or held on any magnetic surface. These instruments feature two high temperature alnico magnets that act as the thermometers base and hold the instrument in place. The bimetallic sensor is located in a draft shield and is in virtual thermal contact with the surface to be measured. This gives the instrument a relatively quick response time. The thermometer reaches sensing equilibrium (stability) within three minutes.

Available Options for this instrument Single Ancillary Hands or Max-Min Ancillary Hands

Designed for applications such as: hot plates; griddles; die-cast dies; foundry core boxes; annealing ovens; weld preheats; motors, generators, and engines; bearings; boilers, tanks ect.

If you have any questions regarding our calibration lab and/or written certification, you can review our Scope of Accreditation or give us a call 877.782.2329

Click image for close-up

312DS Surface Thermometer Dual Magnet with Dual Scale
36.75
Fahrenheit (Temperature Range F 0° to 250°) Celcius (Temperature Range C -20° to +120°)

THE best bimetal surface thermometer on the market for over sixty years. PTC®'s surface thermometers are unrivaled for their combination of accuracy, quality, versatility, and economy. Manufactured from the finest materials, these instruments will continue to give accurate readings for many years. Each thermometer is individually calibrated and serialized. Our thermometers have an accuracy of ±2% of full scale range and are backed by a one year warranty. Certification service using NIST traceable standards and in accordance with ANSI/NCSL Z540-1 is available for all of these units.

For 3 point N.I.S.T. Traceable/A2LA to ISO 17025-ANSI/NCSL Z540-1 Certification, order thermometer with cert.

Technical Data PDF

313DS Surface Thermometer Dual Magnet with Dual Scale
36.75
Fahrenheit (Temperature Range F 0° to 500°) Celcius (Temperature Range F -20° to +250°)

For 3 point N.I.S.T. Traceable/A2LA to ISO 17025-ANSI/NCSL Z540-1 Certification, order thermometer with cert.

Technical Data PDF

314DS Surface Thermometer Dual Magnet with Dual Scale
36.75
Fahrenheit (Temperature Range F 50° to 750°) Celcius (Temperature Range C 10° to 400°)

For 3 point N.I.S.T. Traceable/A2LA to ISO 17025-ANSI/NCSL Z540-1 Certification, order thermometer with cert.

Technical Data PDF

315DS Surface Thermometer Dual Magnet with Dual Scale
36.75
Fahrenheit (Temperature Range F 0° to 150°) Celcius (Temperature Range C -10° to +65°)

For 3 point N.I.S.T. Traceable/A2LA to ISO 17025-ANSI/NCSL Z540-1 Certification, order thermometer with cert.

Technical Data PDF