Image
image
image
image

PTC® Surface Thermometers: Dual Magnet with Max-Min Ancillary Hands

The Max-Min hands are available on PTC®'s Dual Magnet Mount, Four Magnet Mount, and Tab Mount thermometers. These hands have been designed to provide the user an easy way to obtain both maximum and minimum temperatures for a given cycle. The ancillary hands are held in place be a non impeding magnetic clutch. The hands are easily reset before each temperature cycle by using the reset knob and magnetic wand (included with thermometer).

The bimetallic sensor is located in a draft shield and is in virtual thermal contact with the surface to be measured. This gives the instrument a relatively quick response time. The thermometer reaches sensing equilibrium (stability) within three minutes. Single Ancillary Hands are available for this instrument as an option.

Designed for applications such as: hot plates, griddles, die-cast dies, foundry core boxes, annealing ovens, weld preheats, motors, generators, and engines, bearings, boilers, tanks, etc.

If you have any questions regarding our calibration lab and/or written certification, you can review our Scope of Accreditation or give us a call 877.782.2329

Click images for closeup view Click image for close-up



 
 312FMM Surface Thermometer Dual Magnet with Max-Min Ancillary Hands
59.00
 Fahrenheit (Temperature Range F 0° to 250°)

THE best bimetal surface thermometer on the market for over sixty years. PTC®'s surface thermometers are unrivaled for their combination of accuracy, quality, versatility, and economy. Manufactured from the finest materials, these instruments will continue to give accurate readings for many years. Each thermometer is individually calibrated and serialized. Our thermometers have an accuracy of ±2% of full scale range and are backed by a one year warranty. Certification service using NIST traceable standards and in accordance with ANSI/NCSL Z540-1 is available for all of these units.

For 3 point N.I.S.T. Traceable/A2LA to ISO 17025-ANSI/NCSL Z540-1 Certification, order thermometer with cert.

Technical Data PDF Technical Data



 
 312CMM Surface Thermometer Dual Magnet with Max-Min Ancillary Hands
59.00
 Celcius (Temperature Range C -20° to +120°)

For 3 point N.I.S.T. Traceable/A2LA to ISO 17025-ANSI/NCSL Z540-1 Certification, order thermometer with cert.

Technical Data PDF Technical Data



 
 313FMM Surface Thermometer Dual Magnet with Max-Min Ancillary Hands
59.00
 Fahrenheit (Temperature Range F 0° to 500°)

For 3 point N.I.S.T. Traceable/A2LA to ISO 17025-ANSI/NCSL Z540-1 Certification, order thermometer with cert.

Technical Data PDF Technical Data



 
 313CMM Surface Thermometer Dual Magnet with Max-Min Ancillary Hands
59.00
 Celcius (Temperature Range C -20° to +250°)

For 3 point N.I.S.T. Traceable/A2LA to ISO 17025-ANSI/NCSL Z540-1 Certification, order thermometer with cert.

Technical Data PDF Technical Data



 
 314FMM Surface Thermometer Dual Magnet with Max-Min Ancillary Hands
59.00
 Fahrenheit (Temperature Range F 50° to 750°)

For 3 point N.I.S.T. Traceable/A2LA to ISO 17025-ANSI/NCSL Z540-1 Certification, order thermometer with cert.

Technical Data PDF Technical Data



 
 314CMM Surface Thermometer Dual Magnet with Max-Min Ancillary Hands
59.00
 Celcius (Temperature Range C 10° to +400°)

For 3 point N.I.S.T. Traceable/A2LA to ISO 17025-ANSI/NCSL Z540-1 Certification, order thermometer with cert.

Technical Data PDF Technical Data



 
 315FMM Surface Thermometer Dual Magnet with Max-Min Ancillary Hands
59.00
 Fahrenheit (Temperature Range F 0° to 150°)

For 3 point N.I.S.T. Traceable/A2LA to ISO 17025-ANSI/NCSL Z540-1 Certification, order thermometer with cert.

Technical Data PDF Technical Data



 
 315CMM Surface Thermometer Dual Magnet with Max-Min Ancillary Hands
59.00
 Celcius (Temperature Range C -10° to +65°)

For 3 point N.I.S.T. Traceable/A2LA to ISO 17025-ANSI/NCSL Z540-1 Certification, order thermometer with cert.

Technical Data PDF Technical Data



 
 330FMM Surface Thermometer Dual Magnet with Max-Min Ancillary Hands
59.00
 Fahrenheit (Temperature Range F -100° to +160°)

For 3 point N.I.S.T. Traceable/A2LA to ISO 17025-ANSI/NCSL Z540-1 Certification, order thermometer with cert.

Technical Data PDF Technical Data



 
 330CMM Surface Thermometer Dual Magnet with Max-Min Ancillary Hands
59.00
 Celcius (Temperature Range c -70° to +70°)

For 3 point N.I.S.T. Traceable/A2LA to ISO 17025-ANSI/NCSL Z540-1 Certification, order thermometer with cert.

Technical Data PDF Technical Data











image


 image
image