|
|
|
Durometers: Type O
PTC® INSTRUMENTS manufactures a full line of durometers and durometer accessories and offers calibration, repair and certification services. These durometers are available to ASTM D2240, ASTM F1957, JIS K-6301,
JIS K-6253, DIN-53505, ISO-7619 and ISO-868 standards including many custom configurations.
Our sales department will help you determine the correct durometer for your application. We also offer material testing to determine the correct durometer type and style for your application at no charge.
All PTC® Durometers are manufactured in the U.S.A.
PTC Metrology™ Calibration Lab
 Click image for close-up
|
|
201/O PENCIL DUROMETER TYPE O
575.00
Type O: For Soft rubber, elastomers, and very soft plastics
The PTC® Analog Pencil Style Durometers are manufactured to meet or exceed current ASTM D2240 specifications and designed to measure the indentation hardness of rubber, elastomers
and other rubberlike substances such as neoprene, silicone, vinyl, nitrile and butyl. The 360° dial features bold, easy to read numbers indicating a specific value, with a 0.2 resolution.
A standard maximum hold hand retains the peak reading until reset. The durometer's 1/2" diameter base (1.3cm) is the smallest base permitted by ASTM D2240 specifications.
This allows it to be used in confined or hard to reach areas other durometers cannot test.
Technical Data PDF
Add A2LA/NIST Certification for $110.00
•The Constaloader™ Test Stand for durometer 201/O is model 472-2
•The Deadweight Test Stand for durometer 201/O is model 476
|
|
|
211/O DIGITAL PENCIL DUROMETER TYPE O
1175.00
Type O: For soft rubber, elastomers and very soft plastics
The PTC® Digital Pencil Style Durometers are manufactured to meet or exceed current ASTM D2240 specifications and designed to measure the indentation hardness of rubber, elastomers, and other
rubberlike substances such as neoprene, silicone, vinyl, nitrile and butyl. The LCD digital display features bold, easy to read numbers indicating a specific value, with a 0.1 resolution.
A standard electronic maximum hold button retains the peak reading until reset. The durometer's 1/2" diameter base (1.3cm) is the smallest base permitted by ASTM D2240 specifications.
This allows it to be used in confined or hard to reach areas other durometers cannot test.
The Digital Durometer Software allows the users to automatically collect, record, and print test data, create statistical data including tolerance, range, mean, variance, standard deviation in graph
format and several languages. The software interfaces with the Digital Durometer through the provided RS-232 cable.
Technical Data PDF
A2LA/NIST Certification Included
•The Constaloader™ Test Stand for durometer 211/O is model 472-2
•The Deadweight Test Stand for durometer 211/O is model 476
|
|
|
DIGITAL DUROMETER SOFTWARE
595.00
The Digital Durometer Software is truly state-of-the art and is an ideal tool for lab use and for the documentation according to ISO 9000.
Technical Data PDF
|
|
|
410 ERGO STYLE DUROMETER TYPE O
575.00
Type O: For soft rubber, elastomers and very soft plastics
The PTC® Ergo Style Durometers are manufactured to meet or exceed current ASTM D2240 specifications and designed to measure indentation hardness of rubber, elastomers, plastics, wood, leather, foams and
sponge rubber. Models 410, 411, and 413 are all similar in outward appearance, however, by using various combinations of spring forces these durometers cover a wide range of material hardness.
They have a removable threaded mounting knob at the top of the instrument and the base tapers to a 1" x 1" base. (25.4mm x 25.4mm)
These Durometers come complete with Test Block and Carrying Case. The Model 410 and 413 come with magnetic max hand for indicating peak reading.
For unique or unusual materials that are not covered by other durometer types, PTC® recommends sending a full hardness range of your material for evaluation to determine the durometer type to match your material.
Technical Data PDF
Add A2LA/NIST Certification for $110.00
•The Constaloader™ Test Stand for durometer 410 is model 472
•The Deadweight Test Stand for durometer 410 is model 471 or 473
|
|
|
501/O ANALOG e2000 DUROMETER TYPE O
575.00
Type O: For soft rubber, elastomers, very soft plastics, medium density textile windings
The ultimate durometer for accurate hand held hardness measurements of soft rubber, elastomers, and very soft plastics. PTC®'s Model 501/O has a rubber grip and a 1.25" (3.2cm) diameter presser foot
for increased stability and maximum repeatability. The PTC® Analog Style Durometer is built to meet or exceed current ASTM D2240 specifications for Type O durometers.
PTC®' digital durometers come complete with test block , carrying case and NIST traceable certificate from PTC Metrology™.
ASTM "R" Base Size Specific Durometer
Any e2000 Millennium Style Durometer can be made as an "R" designation. The "R" designation specifies a presser foot diameter of 18 ± 0.5mm (0.71 ± 0.02in) in diameter,
while the spring forces and indenter configurations remain the same. Please specify the "R" Type when ordering. US Patent D436,874
Technical Data PDF
Add A2LA/NIST Certification for $110.00
•The Constaloader™ Test Stand for durometer 501/O is model 472-1
•The Deadweight Test Stand for durometer 501/O is model 478
|
|
|
511/O DIGITAL e2000™ DUROMETER TYPE O
1175.00
Type O: For soft rubber, elastomers, very soft plastics, medium density textile windings
The PTC® 511/O Digital Durometer is the successor to the popular model 211/O and is a state of the art durometer that is an ideal instrument for lab use and comes with a NIST traceable certification
from PTC Metrology™. The Durometer features a large LCD display, RS232 data ports for computer compatibility, a locking feature to prevent accidental erasure of tolerances, automatic shutoff and
low battery warning. Accessories include a Test Stand and optional software. The durometer measures the indentation hardness of soft rubber, thermoplastic,elastomers, medium dense textile windings and printing rollers.
The Digital Durometer features a large direct read LCD display, electronic max hand, RS232 data ports for computer compatibility, a locking feature to prevent accidental erasure of tolerances,
automatic shutoff and low battery warning.
Technical Data PDF
A2LA/NIST Certification Included
•The Constaloader™ Test Stand for durometer 511/O is model 472-1
•The Deadweight Test Stand for durometer 511/O is model 478
|
|
|
DIGITAL DUROMETER SOFTWARE
595.00
The Digital Durometer Software is truly state-of-the art and is an ideal tool for lab use and for the documentation according to ISO 9000.
Technical Data PDF
|
|
|
|
|
|
)
)
)
)
)
)