|
|
408E ERGO STYLE DUROMETER TYPE E
575.00
Type E: For Medium density textile windings, soft rubber, foamed elastomers, wound threads, yarn.
The PTC® Ergo Style Durometers are manufactured to meet or exceed current ASTM D2240 specifications and designed to measure the indentation hardness of soft rubber, medium density textile windings,
foamed elastomers and wound threads. This durometer is similar in configuration to the durometer type commonly known as Asker C. They can also be used for soft plastics, felt, leather, and
similar materials. The 408E has an aluminum die-cast case that tapers to a 1" x 1" base. It has a removable mounting knob for comfortable handheld use, a maximum reading hand, test block, and carrying case.
These durometers can be used either with a test stand or as hand-held testers.
These Durometers come complete with Test Block and Carrying Case.
For unique or unusual materials that are not covered by other durometer types, PTC® recommends sending a full hardness range of your material for evaluation to determine the
durometer type to match your material.
Technical Data PDF
Add A2LA/NIST Certification for $110.00
•The Constaloader™ Test Stand for durometer 408E is model 472
•The Deadweight Test Stand for durometer 408E is model 471 or 473
|
|
|
501E ANALOG e2000 DUROMETER TYPE E
575.00
Type E: For Medium density textile windings, soft rubber, foamed elastomers, wound threads, yarn.
The ultimate durometer for accurate hand held hardness measurements. PTC®'s Model 501E has a rubber grip and the 1.25" (3.2cm) diameter presser foot has a large landing area for increased stability and
maximum repeatability. The durometer is built to meet or exceed current ASTM D2240 specifications for Type E durometers. The instrument uses a dial gauge with a full 360 degree scale and bold,
easy to read numbers. The dial scale can easily be read to 0.2 point accuracy. A standard maximum reading hand holds the peak reading until reset. The dial has a red zone below 10 to indicate
unreliable readings.
PTC®' digital durometers come complete with test block , carrying case and NIST traceable certificate from PTC Metrology™.
ASTM "R" Base Size Specific Durometer
Any e2000 Millennium Style Durometer can be made as an "R" designation. The "R" designation specifies a presser foot diameter of 18 ± 0.5mm (0.71 ±0.02in) in diameter,
while the spring forces and indenter configurations remain the same. Please specify the "R" Type when ordering. US Patent D436,874
Technical Data PDF
Add A2LA/NIST Certification for $110.00
•The Constaloader™ Test Stand for durometer 501E is model 472-1
•The Deadweight Test Stand for durometer 501E is model 478
|
|
|
511E DIGITAL e2000™ DUROMETER TYPE E
1175.00
Type E: For Medium density textile windings, soft rubber, foamed elastomers, wound threads ,yarn.
The PTC® 511E Digital Durometer is a state of the art durometer that is the ultimate instrument for hand held hardness testing. The larger diameter base and grip increase stability and maximize
repeatabilty. Model 511E is built to meet or exceed current ASTM D2240 specifications for Type E durometers.
The Digital Durometer features a large direct read LCD display, electronic max hand, RS232 data ports for computer compatibility, a locking feature to prevent accidental erasure of tolerances,
automatic shutoff and low battery warning.
Technical Data PDF
A2LA/NIST Certification Included
•The Constaloader™ Test Stand for durometer 511E is model 472-1
•The Deadweight Test Stand for durometer 511E is model 478
|
|
|
DIGITAL DUROMETER SOFTWARE
595.00
The Digital Durometer Software is truly state-of-the art and is an ideal tool for lab use and for the documentation according to ISO 9000.
Technical Data PDF
|
|
Click image for close-up)
)
)
)