USA
PTC Instruments
homeProductsSite MapShopDownloadscatalogContact Us

Model 320 Durometer Test Stand for A & D Type Duormeters

Accredited by A2LA to ISO/IEC17025 and ANSI/NCSL Z-5401
All PTC Durometers are Made in the USA

The Model 320 Durometer Stand is an accessory to PTC®'s line of 300 and 400 Series durometers, and is also fully compatible with most durometers of other manufacture with a threaded top. This precision engineered stand has a calibrated load cell to provide the ASTM recommended forces for Types A,B,C,D,DO, E or O. The table is self aligning to allow testing of materials with nonparallel top and bottom surfaces.  Manual operation of a durometer will cause variations in the results attained. Improved repeatability may be obtained by using a mass securely affixed to the durometer and centered on the axis of the indenter.

  • Selectable Spring Force from A to D
  • Increase Repeatability Reduce Operator Error
  • One Stand with Two Spring Forces
  • NIST Certification available
  • ASTM Recommended Spring Force 1kg and 5 kg

Model 320 with 306L
Selectable Load Force
PTC Metrology is Accredited by A2LA to ISO/IEC 17025 and ANSI/NCSL Z540-1 for durometer calibration. NIST traceable certification is available. The Calibration Report will include both "as received" and "as left" data on the force curve measurement. Durometer calibration includes: indenter geometry and extension, indicator linearity from 0 to 100, and mainspring force. Other durometer types, custom models, and durometers of any manufacture can also be certified by PTC Metrology.

a2la
 
Specifications and Dimensions
Mounting 8-32
Threaded Shaft
320
Maximum
Sample Height
5" (12.7 cm)
Durometers
306, 307, 408, 409, 410 & 413
Height
17" (43.2 cm)
Width
6" (15.2 cm )
Depth
6.5" (16.5 cm)
Shipping Weight
14lbs. (6.4kg)
ASTM D2240
Type A, B,C,D,DO & O
Certification
NIST Traceable
Home I Products I Site Map I Shop Online I Downloads I Contact Us I PTC Metrology
PTC Instruments 2301 Federal Avenue Los Angeles Ca. 90064-1482
310-478-1134 / 877-782-2329 / Fax 310-312-0826 www.ptc1.com sales @ptc1.com
All rights reserved MMV