Portable Pressure Calibrator PPS41

PTC Instruments offers portable multi function pressure calibrators from DH Budenberg. The latest model PPS41 includes such features as pressure and temperature calibration, leak testing, pressure switch testing and data logging and comes with the option of two integral sensors allowing for calibration in both pneumatic and hydraulic mediums using one calibrator . Complete with an IP65 case, rechargeable batteries and Windows based software, this unit is a portable all around mini calibration laboratory. For technical assistance please contact sales@ptc1.com

Pressure Range 
Media
*Accuracy % fsd
Resolution mbar
Range
**Vac - 2.5 bar
Pneumatic
0.025
0.01
Non Standard
**Vac -7 bar
Pneumatic
0.025
0.01
Non Standard
**Vac -10 bar
Pneumatic
0.025
0.1
Standard
**Vac -20 bar
Pneumatic
0.025
0.1
Standard
**Vac -40 bar
Pneumatic
0.025
0.1
Non Standard
0 to 100 bar
Hydraulic
0.025
1
Standard
0 to 250 bar
Hydraulic
0.025
1
Standard
0 to 400 bar
Hydraulic
0.025
1
Standard
0 to 700 bar
Hydraulic
0.05
1
Non Standard
*Accuracy includes linearity, hysteresis, repeatability and temperature compensation.
** Accuracy on Vaccum range is 0.005 bar.
Electrical Inputs
Input
Range
Accuracy
Resolution
Millivolts
0-200mV
0.02 % fsd
0.001 mV
Volts
0-10V
0.02 % fsd
0.050mV
Volts
0-50V
0.02 % fsd
1mV
Current
0-25mA
0.03 % fsd
0.001mA
PT100
-50°C to 100°C
0.2°C
0.1°C
.
Electrical Outputs
Output
Accuracy
Limits
Notes
24V
± 10%
25mA
Transmitter Supply Only
10V
± 1%
10mA max
Transducer Supply Only
Features
Model PPS41
Two Selectable Sensors
One or two integral pressure ranges
Resolution
User selectable between 3 and 6 digits
Damping
User selectable up to 5 seconds
Pressure Units
11 Pre programmed units plus one user defined unit
Internal Memory
128kB
Pressure Calibration
Including full alphanumeric test , instrument and user id with full time and date stamp
Pressure Generation
Hydraulic pressure generation available in 3 ranges for improved fine control 200/400/700 bar
Audible Warning
For over-pressure and low battery voltage
Data Logging
Up to 100 hours
Software
Windows based automatic calibration software supplied as standard
Peak
Integral peak hold facility
Hold
Integral freeze frame facility
Tare
Integral tare facility for pressure or pressure and electrical values
Leak
The leak test function calculates leak rates over a user defined period and records the pressure change and the test temperature (with an external PT100 DIN )
Switch Test
Records opening and closing pressures for a switch
Backlight
Set to always on , off or timed auto shut off
Home I Products I Site Map I Shop Online I Downloads I Contact Us I PTC Metrology
PTC Instruments 2301 Federal Avenue Los Angeles Ca. 90064-1482
310-478-1134 / 877-782-2329 / Fax 310-312-0826 www.ptc1.com sales @ptc1.com
All rights reserved MMV