Accredited by A2LA to ISO/IEC17025 and ANSI/NCSL Z-5401

e2000 Analog Durometers 502D  (US patent 436,874 )
All PTC Durometers are Made in the USA
Type D: For hard rubber and plastics

The ultimate durometer for accurate hand held hardness measurements. The PTC® e2000 Style Durometers are manufactured to meet or exceed current ASTM D2240 specifications and designed to measure the indentation hardness of hard rubber, plastics, and substances such as acrylic, delrin, kevlar, pvc, nylon and lexan. The 360° dial display features bold, easy to read numbers indicating a specific value, with a 0.2 resolution. The dial has a red zone to indicate unreliable readings.A magnectic max hand holds the peak reading until reset. The durometer's 1.25" (3.2cm) diameter presser foot was designed for increased stability and maximum repeatability. Readings below 10/D may be inexact and should be measured with a type A.

 

 502D
PTC Metrology is Accredited by A2LA to ISO/IEC 17025 and ANSI/NCSL Z540-1 for durometer calibration. NIST traceable certification is available for any durometer type covered by current ASTM D2440, ASTM F1957, ISO 868, ISO 7619, or DIN 53505 standards. The Calibration Report will include both "as received" and "as left" data on the force curve measurement. Durometer calibration includes: indenter geometry and extension, indicator linearity from 0 to 100, and mainspring force. Other durometer types, custom models, and durometers of any manufacture can also be certified by PTC Metrology.
a2la
Specifications & Dimensions
Specifications
PTC® Analog Durometer 502D
Accuracy
±1 point
Resolution
0.2
Max Hand
Magnetic Max Hand
Display
Dial Indicator Gauge 360°
Gauge Features
Red Zone
Base Diameter
1.25" ( 3.2cm)
Height
6" (15.2cm)
Width
2.25" (5.7cm)
Depth (Indicator)
1.5" (3.8cm)
Weight
13 oz.(369g)
Certification
NIST Traceable/A2LA Accredited
Accessories
Test Stand Model 478
Meets or Exceeds
ASTM D2240, ISO 868
ASTM Types
ASTM Type A,B,C,D,DO,E and OO
Other Types
JIS K6253 A or D & K6301 C

e2000™ MILLENNIUM SERIES DUROMETERS
are available in both analog and digital models.

Analog Models
ASTM Type
Digital Models
Test Stands
Type A 
Type B 
Type C 
Type D 
Type O 
Type DO 
Accessories
5kg Deadweight Test Stand
Constaloader Automatic Test Stand
Specify an " R" designation for a presser foot
diameter of 18 ± 0.5mm (0.71 ± 0.02in) in diameter

 
Home I Products I Site Map I Shop Online I Downloads I Contact Us I PTC Metrology
PTC Instruments 2301 Federal Avenue Los Angeles Ca. 90064-1482
310-478-1134 / 877-782-2329 / Fax 310-312-0826 www.ptc1.com sales @ptc1.com
All rights reserved MMV