|
|
|
Durometers: Type C...For Medium hard rubber, Elastomers, and Thermoplastics
PTC® INSTRUMENTS manufactures a full line of durometers and durometer accessories and offers calibration, repair and certification services. These durometers are available to ASTM D2240, ASTM F1957, JIS K-6301,
JIS K-6253, DIN-53505, ISO-7619 and ISO-868 standards including many custom configurations.
Our sales department will help you determine the correct durometer for your application. We also offer material testing to determine the correct durometer type and style for your application at no charge.
All PTC® Durometers are manufactured in the U.S.A.
PTC Metrology™ Calibration Lab
 Click image for close-up
|
|
202C PENCIL DUROMETER TYPE C
575.00
Type C: For Medium hard rubber, Elastomers, and Thermoplastics
The PTC® Analog Pencil Style Durometers are manufactured to meet or exceed current ASTM D2240 specifications and designed to measure the indentation hardness of rubber, elastomers, and other rubberlike
substances such as neoprene, silicone, vinyl, nitrile and butyl. The 360° dial features bold, easy to read numbers indicating a specific value, with a 0.2 resolution. A standard magnetic max hand retains the
peak reading until reset. The durometer's 1/2" diameter base (1.3cm) is the smallest base permitted by ASTM D2240 specifications. This allows it to be used in confined or hard to reach areas other durometers
cannot test. The dial has a red zone to indicate unreliable readings.
Technical Data PDF
Add A2LA/NIST Certification for $110.00
•The Constaloader™ Test Stand for durometer 202C is model 474-2
•The Deadweight Test Stand for durometer 202C is model 477
|
|
|
212C DIGITAL PENCIL DUROMETER TYPE C
1175.00
Type C: For Medium hard rubber, Elastomers, and Thermoplastics
The Pencil Style Digital Durometers with a 1/2" diameter base (1.3cm) and overall length will allow the durometer to be used in confined or hard to reach areas with 0.1 reading resolution..
A knurled surface gives a more secure grip when making hand held readings.
All Digital Durometers come complete with Electronic Max Hold feature, Test Block, Carrying Case and a NIST traceable certification.
Technical Data PDF
A2LA/NIST Certification Included
•The Constaloader™ Test Stand for durometer 212C is model 474-2
•The Deadweight Test Stand for durometer 212C is model 477
|
|
|
DIGITAL DUROMETER SOFTWARE
595.00
The Digital Durometer Software is truly state-of-the art and is an ideal tool for lab use and for the documentation according to ISO 9000.
Technical Data PDF
|
|
|
307CL CLASSIC STYLE DUROMETER TYPE C
550.00
Type C: For Hard Rubber and Plastics
The Models 307CL Durometer is designed to measure the indentation hardness of medium hard rubber, elastomers, and thermoplastics and othersimilar Type C materials.
It is built to meet or exceed current ASTM D2240 and ISO 868 specifications, and can be used either with a test stand or as a hand-held unit. The classic style model 307CL Durometer
comes complete with carrying case, test block and a magnetic max hand that holds the peak reading until reset.
The durometer can be used either with a test stand, hand-held or with the constant load weight. Please refer to the stand selection guide for the appropriate accessories. T
he PTC® classic style Durometer comes complete with carrying case, test block and magnetic max hand.
Add A2LA/NIST Certification for $110.00
•The Constaloader™ Test Stand for durometer 307CL is model 474
•The Deadweight Test Stand for durometer 307CL is model 475
|
|
|
409 ERGO STYLE DUROMETER TYPE C
575.00
Type C: For Medium Hard Rubber and Plastics
The PTC® Ergo Style Durometers are built to meet or exceed current ASTM D2240 specifications for Type C durometers and are designed to measure the indentation hardness of medium hard rubber,
elastomers, and plastics. The Model 409 has an aluminum die-cast case that tapers to a 1" x 1" base, a removable mounting knob for comfortable handheld use and comes complete with a
magnetic max hand for indicating peak readings, test block, and carrying case. This instrument features an easy-to-read dial for faster and more accurate readings.
Technical Data PDF
Add A2LA/NIST Certification for $110.00
•The Constaloader™ Test Stand for durometer 409 is model 474
•The Deadweight Test Stand for durometer 409 is model 473 or 475
|
|
|
502C ANALOG e2000 DUROMETER TYPE C
575.00
Type C: For For Medium Hard Rubber and Plastics
The ultimate durometer for accurate hand held hardness measurements. The PTC® e2000 Style Durometers are manufactured to meet or exceed current ASTM D2240 specifications and designed to
measure the indentation hardness of hard rubber, plastics, and substances such as acrylic, delrin, kevlar, pvc, nylon and lexan. The 360° dial display features bold, easy to read numbers
indicating a specific value, with a 0.2 resolution. The dial has a red zone to indicate unreliable readings. A magnetic max hand holds the peak reading until reset.
The durometer's 1.25" (3.2cm) diameter presser foot was designed for increased stability and maximum repeatability. Readings below 10/D may be inexact and should be measured with a type A.
PTC®' digital durometers come complete with test block , carrying case and NIST traceable certificate from PTC Metrology™.
ASTM "R" Base Size Specific Durometer
Any e2000 Millennium Style Durometer can be made as an "R" designation. The "R" designation specifies a presser foot diameter of 18 ± 0.5mm (0.71 ± 0.02in) in diameter,
while the spring forces and indenter configurations remain the same. Please specify the "R" Type when ordering. US Patent D436,874
Technical Data PDF
Add A2LA/NIST Certification for $110.00
•The Constaloader™ Test Stand for durometer 502C is model 474-1
•The Deadweight Test Stand for durometer 502C is model 479
|
|
|
512C DIGITAL e2000™ DUROMETER TYPE C
1175.00
Type C: For Hard Rubber and Plastics
The PTC® 512C Digital Durometer is a state of the art durometer that is the ultimate instrument for hand held hardness testing. The larger diameter base and grip increase stability and
maximize repeatabilty. Model 512C is built to meet or exceed current ASTM D2240 specifications for Type C durometers. The durometer measures hardness of materials such as medium hard rubber,
thermoplastics, elastomers, medium hard plastics, acrylic, delrin, kevlar, pvc, nylon and lexan, epoxies, and other similar ASTM Type C materials.
The Digital Durometer features a large direct read LCD display, electronic max hand, RS232 data ports for computer compatibility, a locking feature to prevent accidental erasure of
tolerances, automatic shutoff and low battery warning.
What's in the box? NIST Traceable Certificate, AC Adapter, Durometer and Aluminum Test Block.
Technical Data PDF
A2LA/NIST Certification Included
•The Constaloader™ Test Stand for durometer 512C is model 474-1
•The Deadweight Test Stand for durometer 512C is model 479
|
|
|
DIGITAL DUROMETER SOFTWARE
595.00
The Digital Durometer Software is truly state-of-the art and is an ideal tool for lab use and for the documentation according to ISO 9000.
Technical Data PDF
|
|
|
|
|
|
)
)
)
)
)
)
)