ptc met

Accredited by A2LA to ISO/IEC17025 and ANSI/NCSL Z-5401

Asker® Type C & F and JiS Durometers

All PTC Durometers are Made in the USA
 

Durometers for Soft Rubber, Sponge Rubber,
Plastic Foams, Textile Windings

The PTC Asker Type C Durometers are built to meet or exceed specifications SRIS-0101 and JIS K-7312 physical testing methods for molded products of thermosetting polyurethane elastomers.

The model 603 durometer can be used either with a test stand, hand-held or with the constant load weight. Please refer to the stand selction guide for appropriate instruments. The PTC® 603 Durometer comes complete with carrying case, test block and a magnetic max hand that holds the peak reading until reset.

Specifications:

  • Meets or exceeds JIS K 7312 standards.
  • Range: 0 to 100 points.
  • Accuracy: ± 8 gf
  • Spring Load (55-855 gf)
  • 5.08 mm indentor
  • Base about 50 mm x 14mm
  • Dimensions: Height 4 in. (10.2 cm) Width 2-1/4 in.
    (5.7 cm)
  • Depth 1-3/4 in. (4.4 cm)
  • Weight 8 oz. (227g) )

Model 603 Asker® C
Meets Standard K7312

 

PTC Metrology is Accredited by A2LA for durometer calibration to ISO/IEC 17025, ANSI/NCSL Z540-1. NIST Traceable certification is available for all durometer types covered by current ASTM D2440, ASTM F1957, ISO 868, ISO 7619, or DIN 53505 standards. The Calibration Report will include both "as received" and "as left" data. Complete Durometer calibration includes: indenter geometry and extension, indicator linearity from 0 to 100 and mainspring force.

a2la

Asker® C Durometer SRIS-010
Model 604

Asker C Model 604 measures the indentation hardness of soft rubber, sponge and plastic foam, elastomers, and similar materials. The Durometer comes complete with magnetic max hand, test block and carrying case.

Specifications:

  • Meets or exceeds SRIS 0101 standards.
  • Range: 0 to 100 points.
  • Accuracy: ± 8 gf
  • Spring Load (55-855 gf)
  • Dimensions: Height 4 in. (10.2 cm) Width 2-1/4 in.
    (5.7 cm) Depth 1-3/4 in. (4.4 cm)
  • Weight 7 oz. (200g) )
  • Test Block and Case Included.

Model 604
Asker® C

Model 611

Asker® C Pencil Style Digital or Analog

  • Range 0-100 Asker C
  • Accuracy: ± 8 gf
  • Spring Load (55-855 gf)
  • Dimensions: Height 5.3 in. (13.4 cm) Width 2-1/4 in.
    (5.7 cm) Depth 1-3/8 in. (2.8 cm)
  • Meets SRIS 0101 Standard

Model 601
Asker® Type F Style Durometer

Type F: For Foam Rubber Products and Plastic Foams

Asker F is built to meet or exceed current specifications for Asker Type F Durometers. Asker F measures the indentation hardness of Foam Rubber Puffs, Sponges and Plastic Foam. The Durometer comes complete with magnetic max hand, test block and carrying case.

Specifications

  • Range: 0 to 100 points.
  • Accuracy: ± 4.0 gf.
  • Weight 500 grams ±25
  • 80 mm Diameter Presser Foot
  • 25.2 mm Diameter Indenter
  • Carrying Case Included.
JIS-K6301 or JIS K 6253 Type A or C Durometers

Type A for Rubber or Type C for Semi Hard Rubber and Plastic
JIS K6301 or JIS K-6253

  • NIST Traceable Certificate available from PTC Metrology®
  • Range: 0 to 100 points.
  • Truncated Cone Indenter
  • Maximum Reading Hand, Test Block and Carrying Case Included
  • Weight 8 oz. (227g) )

 
Home I Products I Site Map I Shop Online I Downloads I Contact Us I PTC Metrology
PTC Instruments 2301 Federal Avenue Los Angeles Ca. 90064-1482
310-478-1134 / 877-782-2329 / Fax 310-312-0826 www.ptc1.com sales @ptc1.com
All rights reserved MMV