ptcmet1

Temperature Measuring Devices with Readouts and Sensors (RTD PRT TC)
NIST Traceable Standards

Home I Products I Site Map I Shop Online I Downloads I Contact Us

PTC Metrology® is accredited by A2LA to ISO/IEC 17025 and ANSI/NCSL Z540-1. Calibartion services for Temperature Devices, PRT's, RTD's Thermocouples, Probes, Thermistors, Semi-Submersible instruments, Data Loggers, Digital or Analog Stem Thermometers. Certifications will include; as received and as returned data; a statement of uncertainty; laboratory conditions; and information on the primary standards. To assist you in choosing test points please refer to ASTM E-77 and NIST recommendations.

A2LA Accredited (NIST Traceable) Certification Customer Selected Temp Points

This certification will contain the as received and as returned calibration results of the UUT at the point(s) selected by the customer. The points may be selected from the chart below. Information on the customer's UUT and PTC's calibration standards, statement of uncertainty, laboratory conditions and information on the primary standards will also be on the certification. Cost of the certification will depend on which temperature points the customer chooses. To assist you in choosing temperature points, please refer to ASTME-77 and NIST recommendations. Minimum charge for customer selected temperature points is $80.00 per instrument.

 
Temperature Range °C
Temperature Range °F
Price
Nist Traceable
A2LA Accredited
Liquid Nitrogen
approx. -196°C
.
$100.00
-75°C to<-37°C
-103°F to <-35°F
$92.00
-37°C to < 0°C
-35°F to <32°F
$68.00
Triple Point of water
+ 0.01°C
.
$165.00
0°C to 100°C
32°F to 212°F
$44.00
>100°C to 200°C
>212°F to 392°F
$55.00
>200°C to 300°C
>392°F to 572°F
$67.00
>300°C to 370°C
>572°F to 700°F
$79.00
>370°C to 400°C
>700°F to 752°F
$85.00
>400°C to 500°C
>752°F to 932°F
$95.00
>500°C to 1000°C
>932°F to 1832°F
$125.00

A2LA Accredited (NIST Traceable) Certification 3 Points
(within the range of 0°C to 300°C)

This certification will satisfy most quality requirements by providing as received and as returned calibration results of the UUT ( unit under test) . The calibration points will be of PTC's choice and will include three points across the UUT's scale. In addition to the readings, certifications will include a statement of uncertainty, laboratory conditions, and information on the primary standards. Price $115.00 per instrument within the range of 0°C to 300°C see table for other temperature points.

 

NIST Traceable Certification (non A2LA without logged points)

This certification is best for customer's needing only calibration using NIST traceable standards without the added cost of logging the calibration results. Although no specific points will be logged, UUT's referred to will be calibrated at three or more points over the UUT's range. This certification will not list any adjustments or out of tolerance conditions. Certification prices do not include labor, adjustment, repairs, or replacement parts. $70.00 per instrument

Recall Notification

PTC Metrology® will notify you by email when your instrument is due for recalibration, in accordance with the period of validity that your quality system specifies. Please register your instrument today.

A2LA Scope of Accreditation PTC Metrology
Laboratory Test Equipment

 
Home I Products I Site Map I Shop Online I Downloads I Contact Us I PTC Metrology
PTC Instruments 2301 Federal Avenue Los Angeles Ca. 90064-1482
310-478-1134 / 877-782-2329 / Fax 310-312-0826 www.ptc1.com sales @ptc1.com
All rights reserved MMV